Gladiator Pickup Camper EU Size User Guide

Electrical Legs

Instructions for Using the Electrical Legs of the Gladiator Product 1.Mounting the Electric Legs Carefully attach the electric legs to the designated mounting brackets on the Gladiator cabin.

Ensure all clamps and mounting bolts are securely tightened. Legs must be aligned evenly and mounted on a level surface.

2. Electrical Connection and System Activation • After mounting all the legs, carefully connect the power cable plugs to the socket shown in the image below.

Pay special attention to the orientation of the pins to avoid any damage.

• Ensure all connections are secure and free from damage or looseness.(image 1 and 2 down)

Mounting the Gladiator Cabin onto the Vehicle 1. Position the Electric Legs: Use the control panel or remote to adjust the electric leveling legs to a height suitable for mounting the cabin onto the vehicle. 2. Moving the Vehicle Under the Cabin: Slowly and carefully drive the vehicle underneath the cabin. 3. Lowering the Cabin: Carefully lower the cabin using the electric legs until it fully seats on the vehicle. Maintaining balance during this process is essential. 4. Disabling the Electric Legs: Once the cabin’s weight is fully supported by the vehicle, turn off the electric leveling legs and secure them safely to the cabin body if necessary 5. Securing the Cabin with Straps: Attach the straps to the vehicle’s anchor points to secure the cabin, and ensure that the straps are properly tightened. 6. Storing the ElectLegs: If the legs will be used later for leveling at a campsite, place them in the recommended position according to the user’s manual. If not in use, disconnect their power and store them safely inside the vehicle or in a designated storage area. Power on the system using the control panel or remote control to prepare the legs for operation.

hotomobil.com