Gladiator UserGuide EN

GAS SYSTEM

SECTION 3.1 Caravan Gas System

For the safe operation of your LPG system, the gas cylinder and regulator must be connected correctly. Follow every step below carefully. Before installing the cylinder Place the cylinder in the flat, cool, enclosed compartment intended only for that purpose. Keep any spark-producing devices, electrical cables and heat sources away from the cylinder. Make sure there is no dust, oil or dirt around the cylinder valve.

Connecting the regulator

Use a diaphragm that is compatible with the cylinder type and has not expired. Tighten the cylinder valve by hand only. Do not use pliers or a wrench. Check the gasket before connecting the regulator. Never use a worn gasket.

Inspecting hoses and clamps

Make sure there are no cracks, hardening or cuts on the gas hose. Use stainless steel clamps at the connection points, with no looseness. Make sure the hose does not rub against metal edges or bend inside the caravan.

First opening and leak check 1 Slowly open the gas cylinder valve. 2 Apply soap foam to the connection points. If bubbles form, there is a leak and the system must not be used. 3 Never use a lighter, matches or any flame to check for leaks.

Cylinder and regulator connection

Gas system layout

hotomobil.com

GLADIATOR PICKUP CAMPER