USA - Hotomobil-US-Gladiator USA Size - User Guide

Instructions for Using Ventilation Units

The ventilation unit is designed for power consumption up to 2.8A. Before operating, ensure the fuse system of the power supply at the campsite is adequate. Park your vehicle in the shade whenever possible. To prevent radiant heat from penetrating your vehicle, darken the interior with sunshades. Clean the vehicle’s roof regularly, as dirty roofs can cause the interior to heat up more quickly. Before operating the device, ventilate the interior of your vehicle well to allow hot air to escape. To create a healthy environment inside your vehicle, the temperature difference between inside and outside should not be too high. The air circulating inside must be purified and dried. Air free from humidity plays an important role in creating a pleasant environment inside the vehicle even with small temperature differences. To prevent condensation from forming on the air distributor, keep all doors and windows closed while the device is cooling the environment. For faster cooling, set the fan speed to high, adjust the air distribution to medium for front/rear, and set the air distribution to the ceiling for floor/ ceiling.

!

IR Receiver and Operation Indicator

The IR receiver and the manual on/off receiver (m) have an additional push button. In case of remote control loss, you can switch the air conditioner on and off by pressing this button with the tip of a ballpoint pen or a similar object. If the unit is switched on using this button, the system will automatically reset to factory settings (Auto mode, 22°C).

LED 1 (blue): Always on (cooling mode) LED 2 (blue): Flashing (starting the cooling mode compressor) LED 2 (yellow): Continuously lit (heating mode) LED 2 (yellow): Flashing (starting the heating mode compressor) LED 3 (red): Flashing (data transferring) LED 3 (red): Continuously lit (error)

hotomobil.us