USA - Hotomobil-US-Gladiator USA Size - User Guide

Mounting and Dismounting the Gladiator Cabin Instructions for Using the Legs of the Gladiator Product

Removing the Gladiator Body from the Vehicle

Mounting the Gladiator Body onto the Vehicle 1. Removing Inverted Legs: When removing the Gladiator body from the vehicle, carefully detach the inverted legs. 2. Loosening the Straps: Loosen the straps and detach them from the vehicle hooks. Ensure that this process is done carefully to avoid any damage. 3. Mounting the Legs: Attach the legs to the Gladiator body so that they rest on the ground. Ensure the stability of the product during this process. 4. Raising the Legs: Using a cordless drill, raise the body sequentially by the legs without disturbing the balance of the product. Be careful to maintain the balance of the body during this process. 5. Detaching from the Vehicle: Once the Gladiator body is no longer in contact with the vehicle, move the vehicle away, leaving the body alone. 6. Adjusting the Legs to a Safe Height: Using a cordless drill, raise the legs to a safe height of approximately 30 cm from the ground, ensuring the body’s balance is maintained. 1. Adjusting the Legs’ Height: Using a cordless drill, adjust the legs to a height suitable for mounting the body on to the vehicle. 2. Moving the Vehicle: Using a cordless drill, carefully lower the body by the legs, ensuring stability. 3. Lowering the Body: Using a cordless drill, carefully lower the body by the legs, ensuring stability. 4. Removing the Legs: Detach the legs once they are no longer bearing any weight. 5. Securing with Straps: Secure the body onto the vehicle by attaching the straps to the rings on the vehicle and tightening them. 6. Storing the Legs: If the legs are to be used for balance at the campsite, attach them inverted onto the body. If not in use, store them in the garage.

hotomobil.us