Gladiator Pickup Camper USA Size User Guide

LIGHTING SYSTEMS Interior Lighting How to Use

Outdoor Lighting How to Use

The light is turned on and off via the control panel in the camper. When the key is turned on, the light turns on; when it is turned off, the light turns off. This lighting does not include manual touch controls and operates only through the in-vehicle control system . (The image below shows the exterior lighting unit mounted on the caravan body.)

To turn the light on or off, briefly tap the touch-sensitive power icon indicated in red in the image below . The lamp switches between on and off with each touch. Depending on the hardware, in some models, gradual brightness adjustment may be activated when the touch surface is pressed and held for a long time.

Energy and Systems Knowledge

Energy and Systems Knowledge

• •

Operating voltage: 12V DC

- Operating voltage: 12V DC - Thanks to its low energy

It places minimal load on the battery with low energy consumption. The exterior lighting may not work when the RV's main electrical system is turned off.

consumption, it places minimal load on the battery during long-term use.

•

- If the main lighting switch of the caravan is off, the lamp may not receive power (depending on the wiring configuration).

Cleaning and Maintenance

- Before cleaning, make sure the lamp is turned off. - Clean with a soft, dry, or slightly damp cloth. - Do not use high-pressure water, chemical cleaners, or solvents. - Do not strike the LED surface with hard objects.

Cleaning and Maintenance

- Before cleaning, make sure the lamp is turned off. - Wipe with a soft, dry, or slightly damp cloth.

- Do not attempt to disassemble or open the lamp. Tampering with the product may cause damage and void the warranty. - Do not allow direct contact with water. - Do not use the lamp if the cable connections are loose or damaged. - If it will not be used for a long time, it is recommended to turn off the main electrical system. - Do not use chemical cleaners, alcohol, or abrasive substances. - Do not apply pressure to the LED surface with sharp or hard objects. OCTOOPI Systems - Important Considerations

Safety and Usage Warnings

Attention! - Electrical connections should only be made by an authorized service technician. - If it will not be used for a long time, it is recommended to turn off the main electrical system. - It is not recommended to leave it open unnecessarily while driving. - Check the battery level during long-term use. - Do not use the product if you notice any water leakage, cracks, or loose connections. - The warranty may become void if the product is tampered with or disassembled.

18