Gladiator Pickup Camper USA Size User Guide

1.4 The control panel opens, but some devices are not working. Possible Reasons: - The fuse for the relevant circuit may have blown. - The device may have entered protection mode. - The battery voltage is at a critical level.

Attention

Some error codes cannot be cleared by the user and require intervention by an authorized service technician. 2.3 The heater is making noise or won't stop This is normal, especially during initial startup and when the water/ environment is very cold. Depending on the initial temperature of the environment or water to be heated, it is normal for the unit to operate at high power and make noise for the first 5-15 minutes. The noise will stop once the desired temperature is reached. Normal operating scenario: - High power in the initial stage - When the system reaches a stable temperature, the noise and power decrease. - Switches to standby mode If the noise does not decrease at all, the circulation pump or valve positions should be checked. 3.1 The cabin door is locked and won't open. - This situation is usually not mechanical, but rather caused by settings or load. Possible reasons: - • The cabin frame may be twisted. - • The door strike plate may be misaligned. - • The lock mechanism may have been tampered with. 3- Door and Lock Problems

1.5 Cruising Charge - The battery does not charge while charging with the alternator. Possible Reasons: At low voltage, some devices may operate while others may automatically shut down. Information

- DC-DC charger disabled - The engine is not running - Alternator signal is not coming - Insurance or cable outage

Attention

LiFePO₄ batteries cannot be charged properly without a DC-DC charger.

2- Heating System - Eberspächer

2.1 Eberspächer heater is not working If the heater is not working, the cause is often due to power or a lock. Possible reasons: - Battery voltage is low - Insufficient fuel level - The system has locked up after numerous failed attempts. - Error code active 2.2 Eberspächer is displaying an error code. What should I do? - Heater error codes cannot be randomly deleted; the cause must first be eliminated. General approach: - Note the error code

Information

- When the vehicle is placed on level ground and the chassis voltage decreases, the door usually returns to normal.

Attention

- Don't force the door - Place the vehicle on level ground - Adjust the counter if necessary

- Check the battery voltage - Check the fuel line and level - The error code is deleted after the problem is resolved.

Attention

Forcing the door can cause permanent damage to the lock mechanism and door frame.

40