Gladiator Pickup Camper EU Size User Guide

Operating Instructions

1. Remote Control Panel Interface Description

1.1 The remote control needs to be equipped with 3 pcs AAA size batteries before it can be used.

1.2 Simultaneously press and hold the IN and OUT buttons on the remote control to reset the remote receiver, and the green LED 1 will remain on lighting.

1.3 When the tilt sensor is optionally installed, press and hold the remote control IN and button 6 at the same time, and the tilt sensor will be in a horizontal state with green LED 2 constantly on lighting. 1.4 Remote control with a maximum distance of 30 meters. 1.5 When the remote control is not operated for more than 2 minutes, it will automatically shut down. When operating the remote control again, repeat the above “2” operation 1.6 When operating a new remote control due to damage or loss of the original remote control, as shown in the figure below, it is necessary to use a screwdriver or wire to short-circuit the socket in the upper right corner of the controller. The controller indicator light will turn red and flash, and the remote control receiver will be activated. Then, repeat the ‘2’ operation

hotomobil.com