Gladiator Pickup Camper USA Size User Guide

Truma Air Conditioning System

9. Command Transmission / Signal Indicator (SEND) Indicates that the remote control is sending a signal to the device. 10. Reset When there is a problem with the settings, it resets the remote control to All programming and custom settings are reset, and the device returns to its default settings. 12. Ambient Lighting (LIGHT) Turns the device's decorative lighting on and off. a state close to factory default. 11. Reset to Factory Settings

3. Temperature / Degree Setting (TEMP) It allows you to set the ambient temperature between 16°C and 31°C. 4. On/Off Switch - Turns the air conditioner on or off. 5. Clock Setting (CLOCK) Used to set the clock on the remote control. 6. Timer The device is programmed to turn on or off automatically at a specific time. 7. Sleep Mode It operates more quietly during nighttime use. It automatically optimizes fan speed and temperature settings for energy savings. 8. Air Circulation It only provides internal air circulation without cooling or heating.

IR Receiver and Operation Indicator - The IR receiver and manual on/off button (m) can be used to turn the air conditioner on and off if the remote control is lost. A pointed object such as a pen tip is sufficient for this operation. - When the device is turned on using this button, the system returns to factory settings (Auto mode, 22°C). LED Indicators - LED 1 (blue) : Steady on - Cooling mode active - LED 2 (blue) : Flashing - Cooling compressor starting - LED 2 (yellow) : Steady light - Heating mode active - LED 2 (yellow) : Flashing - Heating compressor starting - LED 3 (red) : Flashing - Data transfer - LED 3 (red) : Steadily lit - Error

Control Buttons

1. Mode Button (MODE) Changes the device's operating mode:

2. Fan Level Adjusts the air blowing speed: - Low - Middle - High

- Cooling - Heating - Automatic - Air circulation / Fan

28

Compressor Protection Period