Gladiator Pickup Camper USA Size User Guide

Red LED Warning

- If the red LED is lit, the device has detected a fault. - Turn off the device, wait a moment, and turn it back on. If the red LED continues to be lit: - Do not repeatedly turn the device on and off. - Do not force the device to operate .

- Disconnect the power supply and contact an authorized service center. - In this case, continuing to operate the device may cause permanent damage to the compressor and electronic components and will void the warranty.

Moisture and Condensation Warning If there is excessive humidity indoors, condensation may form in the air distribution ducts during cooling. In this case: - Air ducts must be kept closed. Temperature Setting - Adjust the ambient temperature using the "+" and "–" buttons . - The set temperature is considered the operating target of the device. Operating Mode - Press the MODE button once or multiple times to select the desired operating mode. Current modes: - Cooling - Automatic - Air Circulation How It Works - The room temperature selected via the remote control is displayed on the screen while the compressor is running. - When the compressor stops, the ambient temperature is displayed on the screen. - If the set temperature limit is exceeded, the device automatically restarts.

- The air intake and exhaust vents must not be blocked while the air conditioner is operating. This is a safety rule specifically stated by the manufacturer to prevent the unit from overheating and the compressor from malfunctioning. Important Notices Do not close the air intake and exhaust vents while the device is operating . - If the vents are blocked by items such as belongings, bags, pillows, etc., the compressor may overheat and the device may malfunction. - This situation is not covered by the warranty. Information Regarding Compressor Protection Period - After the device is turned " On ," it may take approximately 3 minutes for the compressor to start. - During this time, it is normal for the device not to respond; this should not be considered a malfunction. Airflow Safety -

- Doors and windows must be closed. - The fan should be set to a high speed.

29