Gladiator Pickup Camper USA Size User Guide

Air Circulation Mode - The indoor air is filtered and circulated. - In this mode, the LED on the IR receiver does not light up. Fan Setting - Press the Fan Level button once or multiple times to adjust the fan speed. - Fan levels: Low – Medium – High - In automatic mode, the fan level is determined by the system. Sleep Function - In sleep mode, the internal and external fans operate at low speed and quietly. - Provides comfortable operation for nighttime use. Shutting Down the Device - To turn off the device, press the On/Off button on the remote control. - Make sure the remote control is pointed toward the IR receiver. Restart - The blue LED lights up when the device is turned on again . - The fan starts working, and the compressor turns on within 3 minutes at the latest . Timer - Set the actual time using the time setting buttons . - The time is continuously displayed on the screen (except when the timer is on/off). - After changing the battery or adjusting for daylight saving time , the clock must be reset. Automatic Mode - Fan speed is automatically adjusted by the system based on ambient temperature. Timer On/Off - The ventilation unit's on/off time can be set to a minimum of 5 minutes and a maximum of 24 hours from the current time. Follow these steps: - Select the desired operating mode and ambient temperature from the remote control. - Press the Timer On or Timer Off button. - Set and confirm the desired opening or closing time. Press the corresponding timer button again to reactivate the timer .

IR Receiver and Manual On/Off Switch An additional physical button is located on the IR receiver and the manual open/close point. When the remote control is lost: - The device can be turned on and off by pressing this button with a ballpoint pen tip or similar thin object . When the device is turned on with this button: - The system automatically returns to factory settings (Automatic mode – 22°C). - Before setting the timer, ensure that the correct time and date information has been entered. Incorrect time settings may cause the device to operate unexpectedly. - Ensure adequate ventilation in the environment where the device is located while the timer is active. Prolonged operation in closed and poorly ventilated areas is not recommended. - Using the timer when the battery level is low may cause the device to fail to operate for the planned duration or to stop midway. - After changing the battery or adjusting the clock for summer or winter time, the timer settings must be checked and reconfigured. Important Notices Ambient Lighting - It operates independently of the ventilation system. - Press the Ambient Lighting button to turn on the lighting. - Press the same button again to close. - When the lighting is turned back on, the last used setting becomes active. Reconfiguring Settings Remote control default settings: - AUTO - 22°C - Timer Off - Ambient Lighting Off Resent settings are saved as the most recent settings in the system. Using the timer function together with Sleep mode optimizes battery consumption by reducing unnecessary fan and compressor operation. For short-term usage needs, it is recommended to set the timer to the minimum duration. Note

30